AGM CHEMICALS – PINK REAPER

First, scrape excess ink back into its container. Then use a screen wash or ink remover compatible with your ink system to clean what remains on the mesh.

If you want to keep the existing stencil, clean the ink without using an emulsion remover. If you are reclaiming the screen for new artwork, remove the ink first, then strip the emulsion and deal with any remaining haze.

Screen wash or ink wash is a general term for chemistry used to remove ink from screen-printing mesh. A press wash is chosen for cleaning during printing or colour changes while keeping the stencil intact. An ink degrader is typically used for more thorough post-print or reclaim cleaning.

Some products suit more than one stage, but application method and compatibility still matter. For example, AGM Green Eco Wash is intended for on-press colour changes and post-print cleaning; AGM Green Citrus Wash is suited to everyday cleaning and ink breakdown.

Plastisol ink does not air-dry like water-based ink, but it still needs proper clean-up. Scrape away as much excess ink as possible, then use a compatible plastisol screen wash to break down the residue and wipe the mesh clean.

For plastisol clean-up, AGM Green Citrus Wash is a strong option. AGM Green Eco Wash is another choice when you want a cleaner for press-side colour changes as well as post-print washing.

Clean water-based ink before it dries in the mesh. Remove excess ink promptly and use the cleaning method recommended for your ink system. Water can help with fresh ink, but a compatible screen wash may be needed for pigment and binder residue.

AGM Green Eco Wash is formulated for water-based ink as well as plastisol, UV and solvent-based systems. It is suitable for everyday screen cleaning and post-run clean-up.

Yes. If you plan to reuse the same artwork, you can clean ink from a screen-printing or silk-screen stencil using a compatible on-press cleaner or screen wash.

Avoid stencil strippers such as AGM Golden Stripper until you actually want to reclaim the screen. Always test any new wash on the emulsion and ink system you are using, especially with delicate or partially worn stencils.

To reclaim a screen for a new design, remove the remaining ink first. Next, use a compatible emulsion remover (also called a stencil stripper or screen reclaimer) to break down the old stencil, then rinse it away according to the product instructions.

AGM Golden Stripper is formulated to remove emulsion and residual ink. For dip-tank use, the recommended dilution is 1 part Golden Stripper to 5 parts water. It can also be applied as a diluted spray where appropriate.

No. A dip tank is useful when regularly reclaiming multiple screens, but it is not essential for every print shop.

AGM Golden Stripper is designed for dip-tank reclaiming and can also be used as a diluted spray application. For a dip tank, mix 1 part product with 5 parts water. Follow the current product label or Technical Data Sheet for application, dwell time and rinsing.

A faint outline of an old design after reclaiming is usually called ghosting, mesh haze or ink staining. These residues can remain even when the ink and emulsion have been removed.

For screens needing further cleaning, AGM Pink Reaper is a post-strip ink, stain and haze remover with a built-in degreaser. It is applied after the stencil has been completely removed.

Not every light ghost image is a printing problem. Inspect the mesh for blocked openings and residual contamination, and use a dehazer when the screen condition calls for it.

AGM Pink Reaper is ready to use—no additional dilution is required. It is a post-strip cleaner, not a substitute for emulsion removal.

1. Completely remove the old stencil and rinse the screen with water.
2. Apply Pink Reaper to the affected mesh and scrub both sides in circular motions.
3. Allow 3–5 minutes for the product to work.
4. Pressure wash both sides; repeat if stubborn staining remains.

These steps reflect the current Pink Reaper product instructions. Use the specified protective equipment and consult the current Safety Data Sheet before handling.

A screen degreaser removes oils, handling residue and other contamination so new emulsion can coat and adhere evenly. A dehazer targets ghost images and staining that can remain after reclaiming. The two jobs are related, but not identical.

AGM Pink Reaper combines stain and haze removal with a built-in degreaser. That can reduce the number of separate cleaning steps, provided the mesh is thoroughly rinsed and clean enough for your coating process.

Choose chemistry that specifically lists compatibility with UV-curable or solvent-based inks. A product that works well on plastisol or water-based ink is not automatically suitable for every graphic or industrial ink system.

AGM Green Citrus Wash is marketed for plastisol, solvent and UV ink cleaning. AGM Green Eco Wash also covers plastisol, water-based, UV and solvent-based systems.

Start with what is still on the screen. You do not need the same chemical to clean wet ink, remove the stencil and treat persistent ghost images.

If you are unsure, tell Jones Brothers what ink you print, whether the stencil needs to stay in place, and what cleaning problem you are seeing. That is usually enough to narrow the recommendation.

Low-VOC and biodegradable do not mean risk-free or automatically drain-safe. Ink residues, wash water and cleaning chemicals still need to be handled and disposed of correctly.

Follow the current product label and Safety Data Sheet. Select suitable chemical-resistant gloves, protective clothing and eye/face protection, ensure good ventilation, and follow your workplace procedures and local wastewater requirements.

Common causes include residual ink blocking the chemical, using an unsuitable stencil remover, insufficient contact with the emulsion, or a hardened or difficult-to-reclaim stencil. Some emulsion removers can also create problems if they are allowed to dry on the mesh.

Check that the ink has been removed, confirm the stripper is suitable for your emulsion, and follow the specified dilution and dwell-time instructions. Do not keep increasing pressure or mixing cleaning chemicals to force a result.