ALBACHEM PREMIUM FLASH ADHESIVE – 13OZ CAN

Description

AlbaChem Premium Flash Adhesive
Make your flash-cure bay work smarter, not harder. AlbaChem’s Premium Flash Adhesive is a high-performance mist-spray specially designed for screen-printing pallet adhesion — when everything else starts to fail, this one thrives. albachem.com+2albachem.com+2

Key Benefits & Performance Features

• Heat-activated tack boost — While many spray adhesives soften, become gummy or lose grip under repeated flashes, this product is made to improve with every flash cycle. In other words: more flashes = more tack. albachem.com+1

• Stable at high‐temperature conditions — Suitable for high-speed automatic presses and multi-flash setups. The adhesive retains grip where lesser sprays fail. albachem.com+1

• Lower frequency of re-application — Because the adhesive holds through more turns, you spend less time spraying and more time printing. albachem.com+1

• Non-transfer and clean removal — Built to stay with the pallet, not migrate onto garments, so your prints remain clean and quality stays high. screeningsuppliesstore.com

• Available formats — Sold in standard aerosol cans (net wt. 13 oz / 368 g) and packaged in cases of 12. Ideal for stocking consumables in busy print shops. albachem.com+1

Usage & Application Notes

• Shake the can well before use.

• Spraying distance: approximately 6–8 inches (15–20 cm) from the surface, using a sweeping motion for even coverage. albachem.com

• For best results in a flash-cure environment: apply the adhesive lightly and uniformly, flash per typical cycle, then proceed with garment placement and printing.

• After use, invert the can and spray until only a clean stream of air flows — helps to prevent nozzle clogging. albachem.com

Technical / Safety Highlights

• Contains no chlorinated solvents. albachem.com

• Meets VOC standards for some regions (refer to variant “1786C” for CARB-compliant version) albachem.com

• Appearance: cloudy/white mist; Flash point: very low (-156 °F / -104 °C propellant) albachem.com
  (Always refer to the Safety Data Sheet (SDS) before use and ensure adequate ventilation and protective equipment per standard shop protocols.)

Ideal For

• High-volume automatic screen printing operations where multiple flashes per garment are required.

• Shops aiming to reduce downtime from pallet re-spray and to maintain consistent tack across full production runs.

• Situations where garment shifting, ink mis-registration or adhesive transfer to garments have become costly bottlenecks.